Polaris Ranger 400 / 500 / 700 / EV Front Ball Joint Puller & Two Ball Joints By Quad Logic

This is the ultimate ball joint kit for your front strut model Polaris UTV! Pulling the ball joints from the aluminum strut housing on most Polaris UTV’s can be a real challenge. We developed this unique tool to make the job much easier. This two piece steel puller simply goes over the balljoint, install the nut, and turn out the inner puller to remove the ball joint. A 6 point 1″socket is required. Zinc plated for corrosion resistance.

The heavy duty design is suited for either home or professional shop use. Unlike other tools on the market that use all of the old ball joints threads, this tool only uses the top few threads of the ball joint. If your threads are damaged, those other pullers will not work! Even in your threads are damaged you can normally still make our puller work due to the dual puller design. Does the balljoint spin freely or slop up and down in its housing? No problem, this puller will easily remove it!

Note: Kit includes TWO heavy duty replacement ball joints and our unique tool to remove the old ball joints. Complete instructions are included.