Polaris Ranger Plow Pro Snow Plow Blade & Frame Kit By SuperATV

Plowing Made Better
Clearing snow is one tough job. If you already have a Plow Pro Snow Plow mount installed on your machine, you need our 72″ Plow Pro Snow Plow Blade and Frame Kit to complete your package. It’s highly adjustable and connects to your mounting plate quickly and easily, so you’re ready to plow in no time. It makes short work of winter’s toughest chore.

The Strength You Need
The blade is made with 10-gauge steel and the cutting edge uses a 4-gauge advanced steel alloy so it can survive endless abuse. It’s beefed up even more with reinforcement ribs on the back so you can keep scraping through ice winter after winter. Plus, the shock-absorbing springs and tilt-forward design give it protection against unwanted impacts.

• 10-gauge steel blade
• 4-gauge leading edge
• Flip-forward design
• Two 4-gauge vertical ribs support high-impact areas
• 10-gauge horizontal support reinforces the leading edge

Highly Adjustable
Plow Pro gives you seven different operating angles between 0 and 30 degrees either side of center, so you can get the perfect angle to move snow effectively on your driveway. The convenient tilt adjustment ensures your angle of attack is spot on even if your machine is lifted by up to 3″. The easy-to-use winch operation is quick and responsive to make lining up your next run a piece of cake. You’ll be done plowing in no time.

• Seven adjustable plowing angles: 0°, 10°, 20°, & 30° left or right of center
• 52° to 65° adjustable attack angle
• Height-adjustable skid shoes

Easy Install
Our snow plow and frame kit is easy to install. Assembling the blade and frame takes no time at all thanks to our full-color instructions. But the best part is that the quick-connect mount (sold separately) lets you attach and remove your plow in minutes so you’re always ready to plow.

Plow Blade & Frame Kit Features:

• 10-gauge steel blade
• 4-gauge steel leading edge
• 72″ wide blade
• 16.25″ scoop
• Seven adjustable plowing angles:
• 0°, 10°, 20°, & 30° left or right of center
• 52° to 65° adjustable attack angle accommodates stock and lifted machines up to 3″
• Two 4-gauge vertical ribs support high-impact areas
• 10-gauge horizontal support reinforces the leading edge
• Height-adjustable skid shoes
• Winch-operated frame

Kit Includes:

• 72″ snow plow blade
• Snow plow frame

Note:

• A machine-specific mounting plate and winch are required to install and operate this snow plow.
• Compatible with Plow Pro Snow Plow Mounts only (sold separately)
• Machines with more than 3″ of lift require our Plow Pro Snow Plow drop bracket: SPB-DB-001

WARNING: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine’s operation.

⚠ California Proposition 65 Warning ⚠
This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.