Polaris Ranger XP 900 / XP 1000 Flare™ Windshield By Klock Werks

You put your UTV to work, and a windshield for your Polaris Ranger should work just as hard. This UTV Flare™ Windshield is up for anything your Ranger is. It’s made from the same material as NASCAR windshields, has superb air flow management with the signature side hips and top flip that redirect air and reduce turbulence, and the AXIA Alloys Mounting System means attaching and detaching the windshield is easy.

Windshield Features:

• Attaches and detaches quickly
• Regulate cab temperature easily
• Added abrasion resistance
• UTV Flare™ sits at same angle as front cage down tubes
• Made to mount to OEM roll cage, but fits many aftermarket cages (with similar to stock dimensions)

Flat windshields tend to push turbulent air directly at the driver and passenger, dumping it right into the cab. The innovative UTV Flare™ Windshield—U.S. Pat. No. 10,118,468—design features “hips” at the outer edge of the shield that re-route air, and the “flip” at the top is designed to kick the air up and back as clean, less turbulent air for driver and passenger. This means you’ll have all the wind and debris protection you need without sacrificing your ability to see!

Made from high-quality Polycarbonate – the same material they use in bullet-proof-glass and NASCAR windshields – this heavy-duty, double-hard-coated, abrasion-resistant shield is up for whatever you are.

Powered by the Axia Alloy Mounting System, these durable billet clamps makes converting the UTV Flare™ from cold weather to warm weather – and back again – easy! Whether it’s work or play, control airflow and the temperature inside the cab.

Included: Necessary hardware and rubber trim.

UTV Flare™ Measurements:

• Height from hood at flip (in front of driver/passenger): 12.5″
• Height from hood at center: 11.75″
• Width across center: 50.5″
• Thickness: 0.156″

Klock Werks Front Flare Windshield 2317-04XX Care Instructions:-

• Create a mixture of mild liquid dish soap and warm water (Recommended UTV windshield washing/cleaning solution)
• Or use Pre-made Polaris Ranger windshield solution option: 13946
• Take your side by side windshield cleaning solution and wash the UTV window(s), interior, and exterior
• Only use a clean soft, micro-fiber cloth to wipe gently and do not scrub- apply very light pressure ***Do not use a paper towel and Windex***
• Rinse UTV windshields well and air dry
• Let dry for at 30 minutes to 2 hours depending on the humidity level of your location
• Get on that machine and have an awesome time now that you can see!!!
• Stay safe while riding out there and check out Everything Polaris Ranger for more UTV parts and accessories

Featured Blog Post: Discover which Polaris Ranger windshields are best for particular seasons, uses, and situations.